
Secure, durable adhesives trusted to withstand moisture, temperature and abrasion.

- Thickness at 0.76 mm.
- Features two adhesives – one on each side of the tape for effective bonding.
- Polyethylene liner with silicone coating on both sides
- Excellent resistance to impact in cold weather
- Excellent adhesion to traditional and advanced paint systems




- Available in a variety of standard widths.
- Thickness at 0.38 mm.
- Double coated acrylic adhesive.
- Color available in grey.
- Used for numerous applications both on the exterior and interior of vehicles.
- Generally the adhesion increases with time, resulting in a durable, high performance bond between the part and the substrate



Convenience meets extreme bonding power, offering design flexibility and powerful ability to bond a variety of surfaces. Closed cell, high-density, flexible foam backing with a pressure-sensitive acrylic adhesive on one side. It allows for quick-stick to a variety of substrates including many metals, glass and plastics. The silicone treated white paper liner helps to minimize stretching during installation.
- Available in black
- Thickness at 0.125 in. (3.2 mm)
- Designed to avoid stretching while leaving the liner in place
- Conformable properties allow taping or sealing on curved or irregular surfaces
- Durable acrylic adhesive on one side of foam offers good aging and UV resistance
- Dust and moisture seal for HVAC, appliances, gasketing, construction and electronic and transportation equipments
- Designed for demanding gasketing, cushioning, damping and insulating applications




Speed up the mounting process with bonding composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Provides quick stick application and conforms to irregular surfaces and low surface energy (LSE) materials.
- Color available in black
- Can be ordered as 72-yard rolls
- Thickness of 0.031 in. (0.8 mm)
- Overall width of 0.37 in (9.5 mm)
- Double coated polyethylene adhesive
- Unique rubber adhesive system provides quick stick
- Provides a high ultimate adhesion to a variety of plastics
- Known for exceptional conformability to irregular surfaces
- Can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.
- Formulated for demanding indoor and general purpose mounting and bonding applications; decorative trim, nameplate mounting, and point-of-purchase displays and signs




Multi-purpose acrylic adhesive with a conformable, foam core. It can replace rivets, welds and screws. The fast and easy to use permanent bonding method provides high strength and long-term durability. It offers design flexibility with its viscoelasticity and powerful ability to bond to a variety of surfaces.
- Available color in grey
- Thickness at 0.045 in (1.1 mm)
- Overall width of 1 in (25.4 mm)
- Overall length of 36 yds (32.92 m)
- Virtually invisible fastening keeps surfaces smooth
- Creates a permanent seal against water, moisture and more
- Allows the use of thinner, lighter weight and dissimilar materials
- Pressure sensitive adhesive bonds on contact to provide immediate handling strength
- UL GREENGUARD and UL GREENGUARD Gold Certified, contributing to LEED Credit




Thick acrylic foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to remove cleanly from many different substrates. It provides high ultimate adhesion to many plastics and is formulated for general purpose indoor and outdoor mounting and bonding applications.
- Color available in clear
- Closed-cell, acrylic foam carrier
- Overall length of 27 yds (24.7 m)
- Thickness of 25.85 mil (0.66 mm)
- Clean removability from many substrates
- Unique acrylic adhesive system provides long term durability
- Overall widths of 0.5 in, 0.8 in, and 1 in (1.3 cm, 1.9 cm, 2.5 cm)
- Common uses include point-of-purchase displays and signs, dispensers, nameplates and other general purpose mounting applications




3M™ VHB™ Tape consists of a durable acrylic adhesive with viscoelastic properties. This provides an extraordinarily strong double sided foam tape that adheres to a broad range of substrates, including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS and painted or sealed wood and concrete.
- Thickness at 2 ml.
- Available in a variety of standard widths
- Virtually invisible fastening keeps surfaces smooth
- Creates a permanent seal against water, moisture and more
- General purpose 0.120 in (3.0 mm) adhesive and firm acrylic foam core
- Fast and easy-to-use permanent bonding method provides high strength and long-term durability
- Commonly used in applications across a variety of markets including transportation, appliance, electronics, construction, sign and display and general industrial; attach logos to appliances, decorative material and trim, nameplates and logos, electronic displays, panel to frame, and stiffener to panel




- Available in a variety of standard widths
- Thickness of 0.045 in (1.1 mm)
- Double coated acrylic adhesive
- Color available in black or white
- Pressure sensitive adhesive bonds on contact to provide immediate handling strength
- Virtually invisible fastening keeps surfaces smooth
- Allows the use of thinner, lighter weight and dissimilar materials
- Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives
- Creates a permanent seal against water, moisture and more by offering better gap filling capabilities




A high tack acrylic that delivers good initial bond and full adhesion within 48 – 72 hours, the adhesive easily flows into crevices and voids without the addition of heat. Quickly bonds to rough and textured substrates including, foam, wood, and textiles, and is ideal for die cutting and converting processes.
- Thickness at 3.0 ml.
- High Tack Acrylic Adhesive 300MP
- Available in a variety of standard widths
- Performs at temperatures up to 250ºF/121ºC
- Mounted on a white colored, 0.18 mm PCK (polycoated kraft) liner.
- Resists UV and features good humidity, water, solvent and chemical resistance.
- The heavy polycoated kraft paper liner makes this adhesive tape ideal for die cutting and converting processes.




This fiber reinforced adhesive is a high performance, high temperature, solvent-free industry standard tape with excellent chemical and moisture resistance.
- Thickness at 0.127 mm
- Double coated acrylic adhesive
- Available in a variety of standard widths
- Adhesive is a mounted on a tan colored, 58 lb. PCK (polycoated kraft) liner
- Designed for short term temperature exposure up to 450°F (232°C) and long term 300°F (149°C)



High-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous applications to dampen sound and create a clean and durable product.
- Thickness of 1/16 in.
- Color available in natural
- Coated acrylic adhesive on one side
- Available in a variety of standard widths
- Helps trap moisture, dust and contaminants
- Adhesive protected by silicone treated paper liner
- Offers high initial quick-stick to multiple substrates
- Excellent cushioning characteristics and high absorbency
- Allows air or gas vapors to pass through for a breathable seal
- Provides excellent shear strength and high temperature performance
- Dampens sounds and absorbs vibration when used in electronic applications


